A very versatile conveyor, the Model TA can be used in many types of material handling situations such as assembly line operations, sorting, packing, and inspection. Conveyor sets up quickly and easily to save on installation time.

•  24" Overall Width
•  20" Belt Width
•  Smooth, Slim Bed
•  Right Hand Drive

•  6 in. Tall Side Rails
•  Hytrol Green Powdercoat

 No Electrical Controls Included

Adjustable MS-06 Floor Supports Are Included

 Standard Specifications:

BED–4 in. deep x 12 ga. formed steel slider bed- powder painted.

END DRIVE–Located on discharge end of conveyor.

DRIVE PULLEY–4 in. dia. with 1 in. dia. shaft at bearings, machine crowned and fully lagged.

TAIL PULLEY–4 in. dia. with 1 in. dia. shaft at bearings, machine crowned.

SNUB IDLER–Adjustable 2 1/8 in. dia. Pre-lubricated ball bearings. Guards included.

RETURN IDLER–Adjustable 1.9 in. dia. pre-lubricated ball bearings.

TAKE-UP–Take-ups at tail pulley. Provides 4 in. of belt take-up.

BEARINGS–Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulleys.

SPEED REDUCTION–Sealed worm gear C-Face speed reducer.  Number 50 roller chain to drive pulley.

MOTOR–½ HP–208/230/460V–3 Ph.–60 Hz. Totally Enclosed C-Face.

BELT SPEED–Constant 65 FPM.

CAPACITY–Maximum load per linear foot of conveyor 75 lbs.